![background image](http://html1.mh-extra.com/html/canon/wux7500/wux7500_user-manual_4218319161.webp)
161
Menu Description
Men
u
Gu
ide
Men
u
De
scr
iption
HDBaseT signal quality
> [System settings] >
[HDBaseT signal quality]
Display the video signal quality of HDBaseT input. The HDBaseT input signal value
received is indicated by a white line.
Extron XTP
> [System settings] >
[Extron XTP]
Specify whether to connect to Extron XTP transmitters when connected via
HDBaseT.
Serial communication
> [System settings] >
[Serial communication]
Select ports used for serial communication. Otherwise, you can refer to this setting
to check setting values for the port selected for serial communication.
High
Indicated by the green portion. This is the recommended level.
Middle
Indicated by the yellow portion. The signal is fluctuating. Check the cable.
Low
Indicated by the red portion. The signal cannot be used. Fix the cable connection
or replace the cable.
Do not coil or bundle cables.
Submenu
Function
Off
Do not connect to XTP devices.
On
Connect to XTP devices.
Submenu
Function
Service port
Use the service port (CONTROL).
HDBaseT
Use the HDBaseT port.
Detail
Option
Function
Baud rate
Modulation rate, in bits per second.
Data bits
Number of bits of data.
Parity
Number of parity bits.
Stop bit
Length of mark representing the end of data
bits. Select 1 or 2.