![background image](http://html.mh-extra.com/html/canon/wux6500/wux6500_manual_62628011.webp)
WUX6500 (11/14)
■
HDBaseT specifications
HDBaseT is used to transfer video signal and network data. HDBaseT transmitter equipment can be
connected directly to the projector using a network cable as the projector is equipped with a receiver.
●
For video signals (HDMI cable is used for connection
①
)
Output device
Transmitter
Receiver
Display device
①
Video signal is sent to the transmitter from an output device such as Blu-ray player.
②
Transmitter then converts the video signal into HDBaseT signal and sends out.
③
Receiver receives the HDBaseT signal and converts to an HDMI signal and sends out.
④
Display device will display the HDMI signal.
●
For network communications (Network cable is used for connection
①
)
Network
Transmitter
Receiver
Display
device
①
Network data is sent to the transmitter from a secured network.
②
Transmitter then converts the network data into HDBaseT signal and sends out.
③
Receiver receives the HDBaseT signal and converts to a network data and sends out.
④
Network data from a display device can transmit in the same manner in reverse direction.
List of HDBaseT transmitters (TX) confirmed to work with the WUX6500
Manufacturer
Model Name
Video
Audio
LAN
Serial
Crestron
DM-TX-201C
Yes Yes Yes No
DM-TX-401C
Yes
Yes
Yes
No
AMX DX-TX
Yes Yes Yes Yes
Kramer
TP-581T
Yes
※
1
Yes
Yes Yes
TP-582T
Yes
Yes
Yes
Yes
Extron
※
2
XTP T USW 103
No No No No
Gefen GEF-HDCAT5-ELRPOL
Yes Yes No
※
3
No
Atlona AT-HDTX-RSNET
Yes
※
1
Yes
Yes
No
CYP PU-507-KIT
Yes
※
1
Yes Yes Yes
IDK HDC-TH100-C
Yes Yes Yes
No
※
4
IMAGENICS CRO-DE20TX
Yes Yes No
No
※
4
※
1 When a certain input device is connected, the picture may not be displayed in intended resolution.
※
2 Extron XTP is not supported.
※
3 LAN transmission disabled when the projector is in Standby mode (Tx is incompatible with LPPF2 mode)
※
4 Serial transmission disabled when the projector is in Standby mode.
WUX6500
WUX6500
Network cable
Network cable