Canon WUX500ST, User Commands

Page: 37 / 95

WUX500ST User Commands
-34-
AUTOPC
Auto PC
Format
Setting Command AUTOPC
Response i:OK
Reference Command -
Response -
Note: See "Error list" for any response other than the above.
Environment
Power mode restriction Input
LAN WiFi RS-232C
SL0 SL1 SL3 PM ON SL0 SL1 SL3 PM ON ST PM ON D-RGB A-RGB COMP HDMI HDBT LAN USB No
signal No No No No Yes No No No No Yes No No Yes No Yes No No No No No No
Remarks
(1) Execution of this command may modify the following setting values.
• Total number of dots
• Tracking
• Horizontal/vertical positions
• Number of horizontal/vertical display dots
(2) To verify changes in setting values, use the GET command with appropriate parameters.
For details, see the following GET commands.
Setting value Reference command
Total number of dots GET=DOTS
Tracking GET=TRACK
Horizontal position GET=HPOS
Vertical position GET=VPOS
Number of horizontal display
dots GET=HPIX
Number of vertical display dots GET=VPIX
Example
>AUTOPC
< i:OK
Note: '>' indicates a command; '<' indicates a response.