45
Ba
sic Op
er
ations
Adjust the Image
Auto PC Adjustment
If the image display is shifted or there is flickering of the screen when [Analog PC-1]
or [Analog PC-2] is selected, press the
AUTO PC
button to adjust the projector to
the optimal condition.
The adjustment results will be stored. If the projector is used again with the same
computer, when the input signal is selected the image will be projected
automatically under the same conditions that were previously adjusted.
Focusing, Resizing, or Moving the Image
Adjusting Image Focus
To adjust the focus, turn the focus ring.
If the Auto PC adjustment is insufficient, perform the following operations.
• Select the input signal that matches the resolution of the computer from [Input signal
select].
• If adjustment is insufficient even when using the above operation, adjust [Total dots],
[Tracking], [Horizontal position], [Vertical position], [Horizontal pixels] and [Vertical
pixels] in [Input signal settings].
Images will waver as you turn the focus ring. Hold the focus ring on top and bottom and
turn it slowly as you adjust the focus.
Remote control
Projector
Focus
adjustment
Focus ring