Canon WUX500, User Manual, Page: 82 / 190

Menu Description
82
Lamp mode
> [Image adjustment] > [Lamp mode]
Reducing the lamp brightness reduces power consumption and cooling fan noise. It
can also be displayed by pressing the
ECO button on the remote control.
Reset
> [Image adjustment] >
[Reset]
Restore the current image quality settings to defaults.
Image priority
> [Image adjustment] > [Image priority]
Select which side image adjustment settings to apply in split-screen mode.
Submenu Function
Full power Projects images at full brightness.
Power saver Reduces lamp brightness to save energy.
Submenu Function
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current
projection is reset.
Submenu Function
Primary
Use the side with control rights as the [Primary] side. For image
adjustment settings that are not configured separately, [Primary] side
settings apply to both sides.
Secondary
You can only switch from [Secondary] to [Primary]. Cannot be selected
directly. To reverse the side used for image adjustment, switch control
rights to the other side and select [Primary].
• Can be independently configured
Brightness ( P78 ), Contrast ( P78 ), Gamma ( P78 ), Color adjustment ( P78 ), Fine-Tune
Gamma ( P81 )
• [Primary] setting also applies to [Secondary]
Image mode ( P77 ), Advanced adjustment except Fine-Tune Gamma ( P79 - P81 ), Lamp
mode ( P82 )