Canon WUX500 User Manual Download Page 93

Page: 93 / 190

Menu Description

Advanced

Guid

Menu Description

User screen settings

> [System settings] >

[User screen settings]

Capture a logo and specify logo display settings.

Logo capture

Registers the current image as a user logo. Registered user logos can be shown when no
signal is received, when the

BLANK

button is pressed, or as the startup image.

Option

Function

Display the image for logo registration.
Align the image with the red boundary lines indicating the portion that
will be stored, and then press the

button. The portion of the image

within the boundary lines is now registered.

Cancel

Cancels logo registration.

Logo position

Specify the position of registered user logos as follows.
You can specify the position after a logo has been registered. Choose from upper left, upper
right, center, lower left, or lower right.

No signal screen

Customize the screen shown when no input signals are received.

Option

Function

Black

The screen is all black.

Blue

The screen is all blue.

User logo

The user logo is projected.

Screen when blank

Select the screen shown when projection is temporarily blanked out by pressing the

BLANK

button on the remote control.

Option

Function

Black

The screen is all black.

Blue

The screen is all blue.

User logo

The user logo is projected.

Projector on

Select a logo to show after startup while the projector is warming up.

Option

Function

Skip

Project input signals immediately after startup.

Canon logo

Displays the Canon logo that was registered in advance at the factory.

User logo

The user logo is projected.

Summary of Contents for WUX500































































































































































































Search results

Summary of Contents for WUX500

Reviews:

Brands by name

Popular brands

Canon WUX500, User Manual

Search results

Summary of Contents for WUX500

Reviews:

Brands by name

Popular brands