17
1
Press the
1
(Playback) button.
2
When you have finished using the
camera, turn the camera off.
1
After use, be sure to completely
dry all the water from the
Waterproof Case.
• Remove any dirt, sand, hair or other debris
from the Waterproof Case, and wash it with
clean, running tap water to remove salt
deposits.
2
Slide the lock release switch as
shown, and release the catch to
open the case. Remove the
camera from the case.
• Be careful not to allow drops of water from
your hair or body to fall on the camera or
Waterproof Case interior when the case is
open.
• Do not wash the interior of the Waterproof
Case with water. Wipe it with a soft, dry cloth.
Playback
1
(Playback) Button
Power Button
After you use the Waterproof Case, be sure to
remove the camera from it. If you leave the
Waterproof Case containing the camera in
direct sunlight or in a high-temperature place,
this may cause a fire or the case to burst.
Removing the Camera
COP
Y
Summary of Contents for WP-DC29
