Canon Wireless File Transmitter WFT-E4 II A, Instruction Manual

Page: 34 / 128

34
These instructions are continued from Chapter 1.
1
Turn the <
5
> dial to select [ Address setting ],
and then press < 0 >.
2
If you have set the DNS server setting to
[
Disable ], the screen at left is displayed.
Press < 0 > to select the input position, and then
turn the <
5
> dial to enter the IP address of the
FTP server.
If you have set the DNS server IP address setting
to [
Auto assign ] or [ Manual setting ], the screen
at left is displayed.
For instructions on screen operations, refer to
“Virtual Keyboard Operation” (p.31).
Enter the FTP server’s server name or IP address.
3
In [ Port number setting ], enter 00021, in most
cases.
Turn the <
5
> dial to select [ OK ], and then press
< 0 > to go to the next screen.
4
Complete the [ Passive mode ] settings.
If an Error 41 (“Cannot connect to FTP server”) is
displayed in step 8, setting [
Passive mode ] to
[ Enable ] may resolve it.
5
Complete the [ Proxy server ] settings.
Turn the <
5
> dial to select [ OK ], and then press
<
0
> to go to the next screen.
Configuring FTP Communication Settings
COP
Y