28
ID Mode
Cancelling ID Mode
Cancelling the selection and removing the restriction on the operation of other VC-C3s
allows all the VC-C3s to again be controlled using the wireless controller.
1. Press the button.
■
The base LEDs on all the VC-C3s blink orange (at
0.5-second intervals).
To cancel the operation, press the button again.
2. Press the button.
■
The VC-C3 ID mode is cancelled and the
restriction on the operation of other VC-C3s is
removed.The base LEDs on all the VC-C3s turn
green and all the VC-C3s can be controlled using
the wireless controller.
The VC-C3 ID mode is now cancelled.
All the VC-C3s can be controlled using the wireless
controller.
Check the base LEDs on the VC-C3s to
ensure that all the VC-C3s are receiving
the signals from the wireless controller.
VC-C3s that do not receive the commands
used in steps 1 and 2 will not operate
correctly.
*VC-C3/E/US/QX3.32 5/29/01 3:26 PM Page 28