Canon VB-M600D Operation Manual Download Page 16

Page: 16 / 145

-4

This section explains various software that can be used with the camera.

Installed Software

Viewer software for displaying images on the PC and

various admin tools are pre-loaded onto the camera. The

software can be used by accessing the camera via a web

browser.

VB-M700/600 Viewer

(See “Chapter 7 Admin Viewer/VB Viewer”)

There are two types of Viewer: the VB Viewer, which can

be used by Guest Users, and the Admin Viewer for

Administrators.

The VB Viewer allows users to configure basic camera

controls and display images, but the visible area is limited

by privacy mask settings. Administrators can also restrict

camera control privileges and audio distribution, as well

as limit camera usage to registered users.

The Admin Viewer lets you monitor all camera controls

and events.

Images are displayed in JPEG format only. To display

H.264 video, install the RM-Lite Viewer (P. 1-6).

Admin Tools

(See “Chapter 6 Admin Tools”)

This tool configures camera settings and performs

management functions.

It includes the Privacy Mask Setting Tool, Intelligent

Function Setting Tool, and the Log Viewer.

Bundled Software

The bundled Setup CD-ROM contains the VB Initial Setting

Tool and the Camera Angle Setting Tool, used when

installing the camera, and RM-Lite, Network Video

Recording Software that records camera images to the PC

(hereafter RM-Lite). Install the software on a PC to use it.

VB Initial Setting Tool

(See “Chapter 2 Initial Settings”)

This tool performs initial settings for the camera (P. 2-4).

Camera Angle Setting Tool

(See “Chapter 3 Camera Angle Setting Tool”)

With this tool, you can operate the camera during

installation while you view video over the network on a PC.

The tool lets you configure zoom, focus, and

exposure compensation.

The tool lets you configure pan, tilt,

rotation, zoom, focus, and exposure compensation.

RM-Lite

(P. 1-6)

This software displays and records images from up to four

cameras in real time.The installer (RMLiteInstall.exe) can

be found in the Applications folder on the Setup CD-ROM.

Proxy Authentication Admin Viewer/Admin
Tools

The camera's built-in Admin Viewer and Admin Tools

cannot be used via a proxy server with proxy

authentication. This software lets you use Admin Viewer/

Admin Tools via a proxy server with proxy authentication.

It is saved in the ProxyAuthSupport folder on the Setup

CD-ROM.

Camera Software

VB-M700F

VB-M600D

VB-M600VE

Summary of Contents for VB-M600D


















































































































































Search results

Summary of Contents for VB-M600D

Reviews:

Related manuals for VB-M600D

Brands by name

Popular brands

Canon VB-M600D, Operation Manual

Search results

Summary of Contents for VB-M600D

Reviews:

Related manuals for VB-M600D

Brands by name

Popular brands