1-14
Setting the Camera Control and External Device
Name (Camera)
General
[Camera Name]
Be sure to enter the camera name into [
Camera Name (alphanumeric characters)
].
Up to 15 ASCII characters (spaces or printable characters) can be used for the [
Camera
Name (alphanumeric characters)
].
You can set the following items.
z
Camera Name
Enter the name of the camera. The camera name is required if VK-64, etc., is used
with the camera.
z
Initial Camera Settings
Set the AE mode, slow shutter, shutter speed and focus mode.
z
Camera Control
Set the digital zoom and image stabilizer.
z
Day/Night
Set the Day/Night switching mode.
z
Installation Conditions
Set whether or not you will use a dome, the LED setting, and the mounting method.
z
Camera Position Control
Set whether or not to limit the camera's pan/tilt/zoom operations to the preset
positions registered beforehand. Also, set the operation to be performed when
control privileges are not requested.
z
External Device Name
Set the external input device name and external output device name.
Tip
If you are using the optional recording software (VK-64/VK-16 or bundled VK-Lite), the
camera name set here will be shown when the camera is registered.
COP
Y
