1-17
Setting the Camera Control and External Device Name (Camera)
1
1
D
etailed Settings
Installation Conditions
[Image Flip]
Select whether or not to output image after rotating it by 180°. Set [
Enable
] or [
Disable
]
according to the installation conditions of the camera. The factory setting is [
Disable
].
External Input Device 1, 2/External Output Device 1, 2
[External Input Device]/[External Output Device]
Be sure to enter each device name to identify the corresponding external device being
connected. Enter the device name (single-byte alphanumerics) using up to 15 characters
(ASCII characters (space or printable characters) excluding a double quotation mark (")).
Note
z
If you want to set [
Auto
] for [
Day/Night
], conduct a thorough operation test and check the
effectiveness of the setting beforehand.
z
If [
Auto
] is selected under [
Day/Night
], set [
Auto
], [
Auto (Flickerless)
], or [
Auto (Shutter-
priority AE)
] under [
Exposure
] on VB-C500 Viewer (
z
If [
Night Mode
] is selected, image does not become brighter even when infrared lamp is
used.
z
If [
Auto
] is selected under [
Day/Night
], zoom does not work while switching between [
Day
Mode
] and [
Night Mode
].
Tip
If you are using Admin Viewer or optional recording software (VK-64/VK-16 or bundled
VK-Lite), the external device name set here will be displayed.
COP
Y
