Canon VB-C500D Operation Manual Download

Page: 136 / 160

5-10

List of Log Messages

A134 Invalid upload setting (FTP/HTTP mode) [notice]

A135 Invalid upload setting (FTP PORT/PASV mode) [notice]

A136 Invalid upload setting (HTTP notification only/image mode) [notice]

A137 Invalid upload setting (E-mail notification) [notice]

A138 Invalid upload setting (E-mail notification authentication mode) [notice]

A220 Video input warning detected [warning]

Description

ftp/http mode invalid. uploader set <none> forcibly (A134)

Meaning

The upload mode setting is invalid. The upload function was forcibly
disabled.

Description

ftp port/pasv mode invalid. uploader set <pasv> forcibly (A135)

Meaning

The PORT/PASV mode setting in connection with FTP upload is
invalid. The PASV mode was forcibly set.

Description

http notice/image mode invalid. uploader set <image> forcibly
(A136)

Meaning

The notification only/image mode setting in connection with HTTP
upload is invalid. The image mode was forcibly set.

Description

mode invalid. uploader set <none> forcibly (A137)

Meaning

The e-mail notification setting is invalid. E-mail notification was
forcibly disabled.

Description

authentication mode invalid. uploader set <smtp auth> forcibly
(A138)

Meaning

The setting for e-mail notification authentication mode is invalid.
"SMTP_AUTH" was forcibly set.

Description

video%1 warning - <Cause of error> (A220)

Video input number

Meaning

An error that permits recovery of the video input system was
detected.

COP

Summary of Contents for VB-C500D

































































































































































Search results

Summary of Contents for VB-C500D

Reviews:

Related manuals for VB-C500D

Brands by name

Popular brands

Canon VB-C500D, Operation Manual

Search results

Summary of Contents for VB-C500D

Reviews:

Related manuals for VB-C500D

Brands by name

Popular brands