Canon varioPRINT 6000 TITAN Series, Manual

Page: 27 / 69

Canon
varioPRINT 6000 TITAN Series Customer Expectations Document
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document Page 26
4.2 Power Requirements for the Main Unit and Optional Accessories
Part or Accessory Power Supply Power Receptacle Length of Power
Cord
Main Unit (Print Engine Module)
3 Phase
208-240V/30 A outlet
NEMA L15-30R 15’ (4.6 m)
Single Phase
208-240V/50 A outlet
NEMA 14-50R 15’ (4.6 m)
PIM 1 115 V/15 A outlet NEMA 5-15R 12’ (3.6 m)
PIM 2 115V/15 A outlet NEMA 5-15R 12’ (3.6 m)
PIM 3 115V/15 A outlet NEMA 5-15R 12’ (3.6 m)
High Capacity Stacker Only 115V/15 A outlet NEMA 5-15R 12’ (3.6 m)
High Capacity Stacker with Set
Finisher
31
115V/15 A outlet NEMA 5-15R 15’ (4.6 m)
Media Enhancement Module 100-240V/15 A outlet NEMA 5-15R 12’ (3.6 m)
PRISMAsync Controller Powered by the Main Unit — —
PrintGuard Unit
32
115V/20 A outlet x 2 NEMA 5-20R x 2 12’ (3.6 m) x 2
GBC PowerPunch 33 110V/20 A outlet NEMA 5-20R 12’ (3.6 m) x 2
BLM6200 12
Single Phase
120V/15 A outlet
NEMA 5-20R 12’ (3.6 m)
BLM6300
Single Phase
120V/15 A outlet
NEMA 5-20R 12’ (3.6 m)
Single Phase
200-240V/20 A outlet
NEMA 6-20R 8’ (2.4 m)
Book Stacker Powered by the — —
BGB3202 Perfect Binder
(Select only ONE outlet
configuration) 34
3 Phase
208-240 V/30 A outlet
NEMA 14-30R —
3 Phase
208-240 V/30 A outlet
NEMA L15-30R —
BGB3202 Compiler
Single Phase
120V/15 A outlet
NEMA 5-15R —
Videk DocuVision Edge
Single Phase
120V/15 A outlet
NEMA 5-15R 9’ (2.7 m)
Single Phase
220V/15 A outlet
NEMA-6-15R 9’ (2.7 m)
12 Formerly named the BLM200.
31 The Set Finisher is powered by the IIM 208V AC (on the Standard TITAN model only).
32 If the PrintGuard units are installed, the customer must provide two, 115V AC, 20 amp, dedicated, single phase
lines. If a finisher is attached, the customer must supply a separate 208V AC, single phase, 20 amp line.
33 Two outlets are required for a system with one stacker, and three outlets are required for a system with two
stackers.
34 The BGB3202 Perfect Binder can only be configured as a 220 V system.