Canon varioPRINT 6000 TITAN Series, Manual

Page: 16 / 69

Canon
varioPRINT 6000 TITAN Series Customer Expectations Document
Revision 4 varioPRINT 6000 TITAN Series Customer Expectations Document Page 15
3. Machine Dimensions and Space Requirements
3.1 Dimensions
The following table includes the width, height, and depth dimensions (in inches and
millimeters) of the main unit and optional accessories.
Unit Width Depth Height
Print Engine 56.7” 1,439 mm 42.2” 1,072 mm 48.2” 1,225 mm
Paper Input Module
Standard-B1
37.2” 945 mm 28.2” 716 mm 45.3” 1,150 mm
Paper Input Module
Flex-A1
37.2” 945 mm 28.2” 716 mm 45.3” 1,150 mm
Input Interface
Module-B1 14
18.5” 470 mm 28.3” 720 mm 45.3” 1,150 mm
Media Enhancement
Module
28.7” 728 mm 28.2” 716 mm 46.1” 1,170 mm
High Capacity Stacker 2.1 45.4” 1,153 mm 29.0” 736 mm 45.3” 1,150 mm
High Capacity Stacker 2.1
with Set Finisher
15
45.4” 1,153 mm 29.0” 736 mm 75.2” 1,910 mm
PrintGuard IV
16 29.5” 750 mm 33.5” 850 mm 47.2” 1,200 mm
Booklet Maker 17 65.9” 1,675 mm 73.6” 1,870 mm 52.4” 1,330 mm
Book Stacker 49.2” 1,250 mm 53.1” 1,350 mm 40.6” 1,030 mm
2-Knife Trimmer
18 36.0” 914 mm 45.0” 1,143 mm 38.0” 965 mm
Booklet Maker
BLM6200 12 17
28.0” 711 mm 35.0” 889 mm 42.0” 1,067 mm
Booklet Maker BLM6300 17 36.0” 914 mm 27.0” 686 mm 48.0” 1,219 mm
GBC Power Punch 19 81.0” 2,055 mm 32.0” 815 mm 44.9” 1,140 mm
BGB3202 Perfect Binder 20 113.0” 2,870 mm 94.9” 2,410 mm 59.0” 1,500 mm
TECNAU SheetFeeder VP
6000 (feeder and cutter)
148” 3,770 mm 43.0” 1,100 mm 63.0” 1,600 mm
PowerLift 21.0” 530 mm 33.0” 850 mm 60.0” 1,520 mm
Videk DocuVision Edge
Camera installed inside the Integrated Camera Module Unit (iCMU)
21
.
Processing unit installed behind print engine and requires 2’ x 2’ of floor
space.
12 Formerly named the BLM200.
14 The height includes the measurements when the operation panel and attention light are attached.
15 The height includes the measurements of the highest point when the Set Finisher is opened.
16 Must attach two PrintGuards, which increases the width of the machine by 57.4” (1,458 mm).
17 The dimensions are only for the main body.
18 The height can be adjusted from 34” to 38” (864 mm to 965 mm)
19 The dimensions include the crated punch unit and a single stacker.
20 Includes the Binder Unit, Compiler, and Output Unit. The dimensions are when the perfect binder is assembled.
21 The iCMU is installed between the engine and PrintGuard IV.