Canon UHD XS, Operation Manual, Page: 77 / 162

E77
4. Operation in Full Mode
[ I-Gain ]
Iris
Remote: 90
Auto: 50
[ ]
[ I-Gain ]
Iris
Remote:
50 Auto:
90
[ ]
[ I-Gain ]
[ I-Gain ]
[Trk]OFF
Shtl VTR
A 1 V
[ ]
MENU 1
A
Fr1P
[ Basic ]
[Trk]OFF
Shtl VTR
A 1 V
[ ]
MENU MENU 1
[ Basic ]
A
Fr1P
[ I-Gain ]
Iris
Remote:
50 Auto:
80
[ ]
Specifying Remote Iris Gain
Although this value is factory-set, it can be adjusted as needed.
The same remote iris gain value applies to all users, regardless of the current user. Thus, there is no need to switch
users in advance. Unlike most other setting adjustments, any changes to this setting also apply to user 0.
Options 01 to 99
Description Minimum gain Maximum gain
Default value: 90
MENU
× 2
[I-Gain]
× 2 or
Note: Do the following when
adjusting gain while checking
iris operation.
→ Confirm that the drive unit A/M
switch is set to [Auto] mode.
→ Set the camera iris mode to
[Remote].
Note: The current iris gain value
is retained even if you reset
other settings as described in
“4.2.1 Resetting Values.” For
this reason, you will no longer
be able to view the default
setting. If necessary, make
a note of the default setting
before adjusting this value.
1
2
3
4
5
Press twice and once.
Your selection is now highlighted.
Press .
The display switches to the [I-Gain] screen .
Press twice.
[Remote] is underlined.
The previous or default value is highlighted.
Press or .
Press left or right until you reach the desired value.
Press .
The display reverts to Screen A .
Initial Top Screen
Screen A
[I-Gain] Screen