Canon TS9500 Series Online Manual Download Page 239

Page: 239 / 540

Important

• The network settings printout contains important information about your network. Handle it with care.

The following setting items are displayed. (Some setting items are not displayed depending on the printer
settings.)

Items

Setting

Connection

Enabled (connected)/Enabled (disconnected)/Disabled

IPv4 address

XXX. XXX. XXX. XXX (12 characters)

IPv4 subnet mask

XXX. XXX. XXX. XXX (12 characters)

IPv4 default gateway

XXX. XXX. XXX. XXX (12 characters)

IPv6 link-local address

XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)

MAC address (Wired LAN)

XX:XX:XX:XX:XX:XX (12 characters)

Printer name

XXXXXXXXXXXXXXX (up to 15 characters)

Bonjour service name

XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)

("XX" represents alphanumeric characters.)

Settings

is selected in the

Wired LAN setting list

screen, the following settings are available.

•

Enable/disable Wired LAN

Enables/disables wired LAN.

•

Advanced setup

For details on each setting item:

Advanced setup

Advanced setup

•

Set printer name

Specifies the printer name. You can use up to 15 characters for the name.

Note

• You cannot use the same printer name as that already used for other LAN connected devices.

• You cannot use a hyphen for the initial or last character of the printer name.

•

TCP/IP settings

Performs IPv4 or IPv6 setting.

•

WSD setting

Setting items when you use WSD (one of the network protocols supported in Windows).

239

Summary of Contents for TS9500 Series





























































































































































































































































































































































































































































































































































Search results

Summary of Contents for TS9500 Series

Reviews:

Brands by name

Popular brands

Canon TS9500 Series, Online Manual

Search results

Summary of Contents for TS9500 Series

Reviews:

Brands by name

Popular brands