Canon TS8250, Online Manual

Page: 224 / 521

LAN settings
Wi-Fi
Wireless Direct
Wi-Fi
When Wi-Fi is selected in the LAN settings screen, the network settings information of the printer when it
is connected by Wi-Fi appears in the Wi-Fi setting list screen.
To print the LAN settings, select Print details in the LAN settings screen and select Yes .
Printing Network Settings
Important
• The network settings printout contains important information about your network. Handle it with care.
The following setting items are displayed. (Some setting items are not displayed depending on the printer
settings.)
Items Setting
Connection Enabled (connected)/Enabled (disconnected)/Disabled
Network name (SSID) XXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXX (up to 32 characters)
Wi-Fi security Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/
WPA2-PSK(TKIP)/WPA2-PSK(AES)
Signal strength (%) XXX
IPv4 address XXX. XXX. XXX. XXX (12 characters)
IPv4 subnet mask XXX. XXX. XXX. XXX (12 characters)
IPv4 default gateway XXX. XXX. XXX. XXX (12 characters)
IPv6 link-local address XXXX: XXXX: XXXX: XXXX:
XXXX: XXXX: XXXX: XXXX (32 characters)
MAC address (Wi-Fi) XXX. XXX. XXX. XXX (12 characters)
Printer name XXXXXXXXXXXXXXX (up to 15 characters)
Bonjour service name XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX
XXXXXXXXXXXXX (up to 52 characters)
("XX" represents alphanumeric characters.)
If Settings is selected in the Wi-Fi setting list screen, the following settings are available.
• Enable/disable Wi-Fi
Enables/disables Wi-Fi.
224