Canon TS6420a Online Manual Download Page 151

Page: 151 / 439

Checking the Power Plug/Power Cord

Unplug the power cord once a month to confirm that the power plug/power cord does not have anything
unusual described below.

• The power plug/power cord is hot.

• The power plug/power cord is rusty.

• The power plug/power cord is bent.

• The power plug/power cord is worn.

• The power plug/power cord is split.

Caution

• If you find anything unusual with the power plug/power cord described above,

unplug the power cord

and call for service. Using the printer with one of the unusual conditions above may cause a fire or an
electric shock.

151

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6420a

Reviews:

Canon TS6420a, Online Manual, Page: 151 / 439

Search results

Summary of Contents for TS6420a

Reviews: