manualshive.com logo in svg

Canon TS6420a, Online Manual, Page: 152 / 439

Share
Download
Canon TS6420a Online Manual Download Page 152

Unplugging the Printer

To unplug the power cord, follow the procedure below.

Important

• Press the 

ON

 button and confirm that the status bar goes off and the display in the LCD disappears

before unplugging the power cord. Unplugging the power cord while the status bar is lit/flashing or a
screen is displayed in the LCD may cause drying or clogging of the print head and print quality may be
reduced.

1.

Press the 

ON

 button to turn the printer off.

2.

Check that status bar goes off and display in LCD disappears.

3.

Unplug the power cord.

The specification of the power cord differs depending on the country or region of use.

152

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Reviews:

No comments