manualshive.com logo in svg

Canon TS6420a, Online Manual, Page: 136 / 439

Share
Download
Canon TS6420a Online Manual Download Page 136

Transporting Your Printer

When relocating the printer for changing your living place or repairing it, make sure of the following.

Important

• Pack the printer in a sturdy box so that it is placed with its bottom facing down, using sufficient

protective material to ensure safe transport.

• With the print head and FINE Cartridge left installed in the printer, press the 

ON

 button to turn off the

power. This allows the printer to automatically cap the print head, thus preventing it from drying.

• After packing, do not tilt the box containing the printer or turn it on its side or upside down. Doing so

may cause the ink to leak during transport and cause damage to the printer.

• When a shipping agent is handling transport of the printer, have its box marked "THIS SIDE UP" to

keep the printer with its bottom facing down. Mark also with "FRAGILE" or "HANDLE WITH CARE".

1.

Turn the printer off.

2.

Close the operation panel.

3.

Unplug the power cord

.

Important

• Do not unplug the printer while the status bar is lit or flashing, or while a screen is displayed in the

LCD, as it may cause malfunction or damage to the printer, making the printer unable to print.

4.

Retract the paper output tray and the paper output support.

5.

Retract the paper support, and close the rear tray cover.

6.

Shorten cassette.

7.

Unplug the printer cable from the computer and from the printer, then unplug the power
cord from the printer.

8.

Use adhesive tape to secure all the covers on the printer to keep them from opening during
transportation. Then pack the printer in the plastic bag.

136

Summary of Contents for TS6420a
























































































































































































































































































































































































































































Reviews:

No comments