Canon TS6400 Series Online Manual Download Page 389

Page: 389 / 439

Message (Support Code) Appears

This section describes some of the messages that may appear.

Note

• A support code (error number) is displayed for some errors. For details on errors that have support

code, see

List of Support Code for Error

If a message appears on the printer's LCD, see below.

Message Appears on Printer's LCD

If a message appears on the computer, see below.

Error Regarding Automatic Duplex Printing Is Displayed
Error Regarding Power Cord Being Unplugged Is Displayed (Windows)
Writing Error/Output Error/Communication Error (Windows)
Other Error Messages (Windows)

Message Appears on Printer's LCD

Check the message and take the appropriate action.

•

Power was not turned off correctly the last time. Press

when turning power off.

The printer may have been unplugged while the power was still on.

Press the printer's

button to cancel the error.

See

Unplugging the Printer

to unplug the printer correctly.

•

Cannot connect to the server. Please wait a while and try again.

The printer cannot connect to the server due to a communication error.

Press the printer's

button to cancel the error and try again after a while.

Error Regarding Automatic Duplex Printing Is Displayed

Check

See Automatic Duplex Printing Problems and take the appropriate action.

Error Regarding Power Cord Being Unplugged Is Displayed (Windows)

The printer may have been unplugged while it was on.

Check the error message that appears on the computer and click

The printer starts printing.

See

Unplugging the Printer

to unplug the printer correctly.

389

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands

Canon TS6400 Series, Online Manual

Search results

Summary of Contents for TS6400 Series

Reviews:

Brands by name

Popular brands