manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 115

Aligning the Print Head Manually

Try aligning the print head manually after automatic print head alignment if printing results are not as
expected, as when printed ruled lines are misaligned.

Note

• For details on automatic print head alignment, see 

Aligning the Print Head

.

What you will need: three sheets of A4 or Letter-sized plain paper

1.

Check that printer is turned on.

2.

Load three sheets of A4 or Letter-sized plain paper in cassette.

Loading Plain Paper in Cassette

3.

Press the 

OK

 button.

4.

Select 

Maintenance

.

5.

Select 

Print Head Alignment - Manual

.

The confirmation screen will appear.

Note

• To print and check the current head position alignment values, select 

Print the head alignment

value

.

6.

Check message and select 

Yes

.

7.

Press the 

OK

 button.

The print head alignment pattern will be printed.

8.

When 

Did the patterns print correctly?

 appears, make sure pattern was printed correctly,

and if so, select 

Yes

.

115

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands