manualshive.com logo in svg

Canon TS6400 Series, Online Manual

Share
Download
Canon TS6400 Series Online Manual Download Page 113

Aligning the Print Head

If printed ruled lines are misaligned or print results are otherwise unsatisfactory, adjust the print head
position.

Note

• If the remaining ink level is low, the print head alignment sheet will not be printed correctly.

Replace the FINE Cartridge

 whose ink is low.

• If ink runs out as the print head alignment sheet is printed, an error message appears on the LCD.

When Error Occurred

You need to prepare: two sheets of A4 or Letter-sized plain paper

1.

Check that printer is turned on.

2.

Load two sheets of A4 or Letter-sized plain paper in cassette.

Loading Plain Paper in Cassette

3.

Press the 

OK

 button.

4.

Select 

Maintenance

.

5.

Select 

Print Head Alignment - Auto

.

The confirmation screen will appear.

Note

• To print and check the current head position alignment values, select 

Print the head alignment

value

.

6.

Select 

Yes

.

7.

Press the 

OK

 button.

The print head alignment sheet is printed, and the print head is aligned automatically.

113

Summary of Contents for TS6400 Series
























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands