Canon TS5100 series Online Manual Download Page 260

Page: 260 / 433

Printing/Scanning with Wireless Direct

You can connect devices (e.g. smartphone, or tablet) to the printer by two methods below.

• Wireless connection (connecting devices via a wireless router)
• Direct wireless connection (connecting devices using Wireless Direct)

This section describes Wireless Direct, which allows you to print or scan by connecting the devices to the
printer directly.

Follow the procedure below to use Wireless Direct.

Enable Wireless Direct.

Connect devices to printer.

Perform printing or scanning operation.

Important

• You can connect up to 5 devices to the printer at the same time.
• Check the usage restrictions and switch the printer to the Wireless Direct.

Restrictions

Preparing for Wireless Direct

Change settings below to prepare for Wireless Direct.

• Printer's LAN settings

Enabling Wireless Direct of Printer

• Settings of a device to connect

Connecting the Device to the Printer

Enabling Wireless Direct of Printer

Make sure printer is turned on.

2. Select

Setup

on the HOME screen.

LCD and Operation Panel

3. Select

Settings

4. Select

Device settings

5. Select

LAN settings

6. Select

Wireless Direct

260

Summary of Contents for TS5100 series


















































































































































































































































































































































































































































Search results

Summary of Contents for TS5100 series

Reviews:

Brands by name

Popular brands

Canon TS5100 series, Online Manual

Search results

Summary of Contents for TS5100 series

Reviews:

Brands by name

Popular brands