Canon Super G3 Fax Board-AF1, Service Manual

Page: 59 / 74

Chapter 5
5-17
5.7.1.4 DTMF Transmission Test
0025-3165
Of the items indicated below, press one; in response, the DC circuit will be closed and the selected DTMF signal will be transmitted using the DTMF transmission
function of the modem. You can also monitor the transmission signal by listening to the speaker. To stop the operation and to end test mode, press the key.
F-5-10
<Using Text Mode>
1) From the items indicated on the screen, select the item you want to test; then, press the key on keypad that corresponds to the DTMF signal to test.
5.7.1.5 V.34 G3 Signal Transmission Test (V34G3Tx)
0025-3166
Select the transmission speed you want to test, and then select a modulation speed (baud rate); in response, the V.34 G3 transmission signal will be transmitted to
the telephone line terminal and the speaker. To stop the operation and to end test mode, press the key.
F-5-11
<Using Text Mode>
1) Select 'SPEED', and then select the speed you want to test using the Up/Down key.
2) Select the baud rate you want to test.
'SHORT' is not currently supported.
<1/1>
<READY>
Report
Sssw Menu Num Ncu Type ISDN Print Clear Test
<DTMFTX> <MODEM>
OK
LONG
SHORT
0 1 2 3 4 5 6 7 8 9 * #
0 1 2 3 4 5 6 7 8 9 * #
<1/1>
<READY>
Report Sssw Menu Num Ncu Type ISDN Print Clear Test
<V34G3TX> <MODEM>
OK
SPEED 33600bps
3429baud
3200baud
3000baud
2800baud
2743baud
2400baud