Canon Super G3 Fax Board-AF1, Service Manual

Page: 55 / 74

Chapter 5
5-13
5.5.2 Setting of Numeric Parameter (NUMERIC Param.)
5.5.2.1 Numerical Parameter Composition
0025-3156
F-5-5
T-5-20
5.5.2.2 <001: printing upon reception of extra-length image>
0025-3157
Use it to set the range of the image to be removed from when printing an extra-length received image.
Lower the parameter to decrease the range if the trailing edge of the received image must be retained (as when it is longer than the effective recording length).
5.5.2.3 <004: leading edge margin>
0025-3158
Use it to set the leading-edge margin for the effective recording length.
5.5.2.4 <005: trailing edge margin>
0025-3159
Use it to set the trailing-edge margin for the effective recording length.
No. Function Setting range Initial setting Unit
01 Missing areas of printing image when receiving image with longer length than standard 0 to 9999 12 1 mm
04 Leading edge blank area 0 to 9999 3 1 mm
05 Trailing edge blank area 0 to 9999 3 1 mm
<1/4>
<READY> <NUM>
Report Sssw Menu Num Ncu Type ISDN Print Clear Test
OK
xxxxx
001
xxxxx
002
xxxxx
003
xxxxx
004
xxxxx
005
xxxxx
006
xxxxx
007
xxxxx 008