Stacking Sheets
2-3
Operating Procedures
2
4
Press the front cover open button and open the front cover.
5
Place the stack tray and close the front cover.
· Push the stack tray to the rear until it is held by the magnet of the sup-
port.
· If the tray is placed incorrectly, it will not move up when the front cover is
closed.
6
Turn on the stacking function.
Press the Stack ON/OFF button. When the LED to the left of the button lights up (green),
the stacking function is active.
If the stacking function is not turned on, you cannot select the stacker for the out-
put, from the printer.
Set up the printer and start printing. See the operating manual for the printer.
Front Cover Open
Button
Lit:
Front cover can be
opened.
Blinking: Do not open the
front cover.
Stack Tray
Error
Enter
ON/OFF
+ /
Stack
Stack ON/OFF Button
This button is invalid during a job.
ON: Activate
OFF: Deactivate
Summary of Contents for Stacker-C1
