Wireless Multiple Flash Shooting with a set Flash
Ratio
This section describes wireless multiple flash shooting using manual flash. You can set the
flash output in 1/3-stop increments for shooting in the range from full flash (1/1) to 1/8192
flash for each firing group. Set all the parameters on the sender unit.
1.
Select <
> with the joystick.
2.
Set the flash mode to <
>.
Press the joystick up, down, left, or right, or turn <
> and select
<
>, then press the joystick vertically.
3.
Push the joystick vertically.
141