Canon Speedlite 600EX, Instruction Manual

Page: 66 / 124

64
This describes wireless (multiple flash) shooting using manual flash.
You can shoot with a different flash output setting for each slave unit
(firing group). Set all parameters on the master unit.
1
Set the flash mode to <
q
>.
2
Set the number of firing groups.
While <
M
> is displayed, press
function button 2 <
T
> and set
the groups to fire.
The setting changes as follows each
time you press the button:
ALL (
_
)
→
A/B (
%
)
→
A/B/C (
]
).
3
Select a firing group.
Press function button 3 <
F
>,
turn <
9
> and select the group for
which you want to set the flash
output.
4
Set the flash output.
Press function button 3 <
1
>.
Turn <
9
> to set the flash output,
and press the <
8
> button.
Repeat steps 3 and 4 to set the flash
output of all groups.
5
Take the picture.
X
Each group fires at the set flash ratio.
q
: Wireless Multiple Flash Shooting with Manual Flash Output
When ALL <
_
> is set, set A, B or C as the firing group for the
slave units. The flash will not fire if it is set to D or E.
To fire multiple slave units with the same flash output, select ALL
<
_
> in step 2.
COP
Y