Canon Speedlite 470EX-AI, Instruction Manual

Page: 52 / 116

52
W AI.B Full-Auto Shooting
When the shooting distance to the subject changes
Press the <
X
> button or the like (p.49) and re-measure the
shooting distance to the subject.
When a warning appears on the Speedlite LCD panel
FAQ
Warning Solution
AI.B
[
Attach the Speedlite to the camera, then press the
<
X
> button.
RETRY
An obstacle has come into contact with the flash
head preventing the appropriate operation.
Remove the obstacle and perform the same
operation once again.
AI.B ERROR
The same operation was performed three times,
but the appropriate operation could not be
completed. Turn the power off and on again,
temporarily set the <
X
> switch to the < 0° >
position, or do the like.
The camera is not compatible with AI.B full-auto
mode. Perform AI.B semi-auto shooting (p.56) or
manual bounce flash photography (p.61).
CAMERA POWER
IS OFF
The camera power is not turned on. Turn on the
camera power, then press the <
X > button.
AI.B-F
Flash coverage angle cannot be manually set
during AI.B full-auto shooting.
WIDE PANEL
The wide panel cannot be used during AI.B
full-auto shooting. Retract the wide panel.
BOUNCE ADAPTER
When the bounce adapter is used, the flash
coverage cannot be set manually.
WIDE PANEL +
BOUNCE ADAPTER
With the wide panel pulled out, the bounce
adapter is attached. The flash coverage cannot be
set manually.