Canon Smart Base MP730, Circuit Diagrams

Page: 8 / 49

2
c) JUMPER TERMINAL SYMBOL
Jumper terminal symbols are as shown below.
Figure 3 Jumper Terminal Symbol
d) UNMOUNTED PART SYMBOL
Parts marked with ### are not mounted on the PCB.
Figure 4 Unmounted part Symbol
1.2 INDEX
Each circuit diagram has an index, like the one shown here, on the lower right
hand side.
Figure 5 Index
No. : Number of modification to this manual
REMARKS : Modification content
DRAWING NAME
: Name of circuit diagram
DRAWING No. : Drawing number of this diagram
MODEL NAME : Name of model corresponding to Part No.
PART No.
: Service part number of relevant board in this circuit
diagram
REV. : Version number indicating revision of this diagram
No. REMARKS
DRAWING NAME
DRAWING No.
REMARKS PATR No. REV.
Connected Jumper Terminal
Disconnected Jumper Terminal
###
# # #
<F. A.> <MODE>
SW330
SW330 is not mounted on the PCB.
SW340
JP328