Canon Shift Tray-D1, Service Manual

Page: 32 / 46

Chapter 3
3-4
F-3-12
3.2.1.2 Removing the Tray
Drive Unit
0009-3526
1) Free the 2 retaining claws [1], and detach the cable
retaining plate [2].
F-3-13
2) Remove the 2 screws [3], and detach the 2 tray full
sensors [4] and the 2 grounding wires.
3) Free the cable of the tray full sensor from the clamp
[5], and disconnect the connector [6].
F-3-14
4) From the back of the shift tray, remove the 4 screws
[7] and detach the 4 shaft retainers [8]; then, detach
the tray drive assembly [9].
F-3-15
5) Pull off the shaft [10] from the tray drive assembly;
then, remove the 3 screws [11], and detach the shield
cover [12].
F-3-16
6) Remove the 2 screws[13] and the connector [14];
then, remove the tray drive unit [15].
F-3-17
[1]
[1]
[2]
[3]
[4]
[4]
[5]
[6]
[7]
[8]
[8]
[9]
[11]
[12]
[10]
[13]
[14]
[15]