Canon SELPHY CP1500, Advanced User'S Manual, Page: 108 / 134

Wi-Fi
Do not use the printer near sources of Wi-Fi signal interference, such as microwave ovens,
Bluetooth devices, or other equipment operating on the 2.4 GHz band.
Printer network name (SSID) is not displayed when connecting to a
camera or smartphone
As the connection method, choose [ Direct Connection ] ( , ).
Keep the printer near the camera or smartphone, without objects between them.
Router is not displayed on SELPHY
Cannot connect SELPHY to the router
As the connection method, choose [ Via Wireless Router ] ( ).
Confirm that the router is on and ready for communication. For instructions on how to
check, refer to the router user manual.
If there are many routers but the required one is not listed, connect by using [
WPS
Connection ] ( ) or by selecting [ Manually ] in [ Via Wireless Router ] ( ).
Keep SELPHY near the router, without objects between them.
Confirm that the password is correct, and try connecting again.
Confirm that the router channel is set in a range of 1–11. Instead of auto channel
assignment, it is advisable to specify a channel in this range manually. For instructions
on checking or adjusting the settings, refer to the router user manual.
If the router filters communication by MAC or IP addresses, on the router, register the
information about SELPHY shown when you check the settings in [
Confirm Settings ]
( ). For instructions on checking or adjusting the settings, refer to the router user
manual.
In WEP networks without DHCP, set the IP address manually (
).
Cannot connect via Wi-Fi
SELPHY cannot communicate on the 5 GHz band. Enable use of the 2.4 GHz band in
the settings of your router.
Try restarting SELPHY. If a connection still cannot be established, check the settings of
the wireless router or other device for the Wi-Fi connection.
If connection is not possible with [
WPS Connection ], try connecting by using [ Find
wireless routers ] ( ) or by selecting [ Manually ] in [ Via Wireless Router ] ( ).
108