Canon Selphy CP1300 User Manual Download Page 74

Page: 74 / 85

Appendix

Printing without a Power Outlet

To print where no power outlet is available, use Battery Pack NB-CP2LH

(sold separately). On a full charge, up to about 54 sheets* of postcard-

size paper can be printed.

According to Canon testing. May vary depending on printing conditions.

Attaching the Battery Pack

Remove the battery pack

mounting cover.

With the switch held in the direction of the

arrow ( ), pull the cover off ( ) to remove

it.

Remove the battery terminal

cover.

Insert the battery pack.

Slide the terminal-end in the direction of

the arrow ( ) and insert the other end ( )

until it clicks into place.

•

Battery Pack NB-CP2L (sold separately) is also supported. On a full charge, up

to about 36 sheets

of postcard-size paper can be printed.

According to Canon testing. May vary depending on printing conditions.

Air vent

Summary of Contents for Selphy CP1300






















































































Search results

Summary of Contents for Selphy CP1300

Reviews:

Related manuals for Selphy CP1300

Brands by name

Popular brands

Canon Selphy CP1300, User Manual

Search results

Summary of Contents for Selphy CP1300

Reviews:

Related manuals for Selphy CP1300

Brands by name

Popular brands