![background image](http://html2.mh-extra.com/html/canon/scanfront-300/scanfront-300_instructions-manual_4248265019.webp)
1-8
Chapter 1 Before Use
3.
Names and Functions of Parts
The names and functions of the parts of the ScanFront 300/300P are shown below.
❏
Front and Document Feed and Eject Trays
a
Tray Extension
Open this to prevent scanned documents from slipping off.
b
Document Eject Tray
Open this tray when using the ScanFront. If scanned
documents curl in the document eject tray, remove the
entire tray.
c
Panel Unit
Open this when there is a paper jam or to perform
maintenance.
d
Touch Panel
Touch this screen to operate the ScanFront.
e
Lock Lever
Locks the panel unit. Pull the lever toward you to unlock
the panel unit.
f
Document Guides
Adjust these to match the width of the document.
g
Document Feed Tray
h
USB Port (Front)
Connect a USB1.1/Hi-Speed USB2.0 compatible USB
memory device, USB keyboard, or USB mouse.
i
Power Switch
Use this to turn the power ON.
*
Use the Power OFF button on the touch panel to turn the
power OFF.
j
Feed Selection Lever
Use this lever to change the feed method for documents.
k
Power Indicator
Lights when the power is ON.
l
Fingerprint Authentication Sensor (Only Available
with the ScanFront 300P)
This fingerprint sensor is for fingerprint registration and
authentication.