Canon Saddle Finisher-T2, Service Manual

Page: 142 / 262

Chapter 3
3-40
F-3-160
3.3.3.7 Removing the Tray 2
0009-3589
When moving the tray down to attach it, you need
to push the tray lift motor gear [1] to the front (using
a screwdriver or the like) to release the clutch.
However, when the clutch is released, the tray [2]
drops by its own weight. Be sure to hold the tray
with your hand when releasing the clutch.
F-3-161
1) Remove screw [1] and remove the stopper [2].
F-3-162
2) Remove the screw [1] and disconnect the connector
[2].
F-3-163
3) Lift tray 2 [1] to remove it.
F-3-164
When installing the tray, be careful not to twist the
[1]
[3]
[2]
[2]
[1]
[1]
[2]
[2]
[1]
[1]