Canon Saddle Finisher-AF2, Service Manual

Page: 29 / 244

Chapter 2
2-3
<CD/Guide>
-FCC Class A sheet(USA only)
2.3 Installation Procedure
2.3.1 Unpacking
0020-9249
1) Take out the equipment from the package.
2) Take the included package out.
3) Remove the packing material on the top of this equipment and bring down
the plastic to the bottom.
F-2-4
4) Lift up one side to remove the packing material [1] at the bottom and slow-
ly bring the equipment down.
F-2-5
5) Lift the other side as well to remove the packing material [1].
(The plastic material [2] should be removed at the same time)
with Finisher-AF1 only
with Saddle Finisher-AF2 only
EUR destination only. Use the appropriate power cord according to the country/region to install. Be sure to bring back the unused power
CAUTION:
To unpack the host machine, depends on the holding position, can cause the
transformation of the host machine, or even breakage. Don't hold it by the
transportation guide [1].
[1]
[2]
[1]
[1]