Canon Saddle Finisher-AF2, Service Manual

Page: 123 / 244

Chapter 4
4-13
F-4-52
3) Move the grip [1] as the direction of the arrow, and open the saddle stack
guide assembly [2].
F-4-53
4) Remove the cable cover [1].
- 2 screws [2]
F-4-54
5) Remove the saddle staple unit [1].
- 1 connector [2]
- 2 screws [3]
F-4-55
4.3.7 Front Alignment Motor
4.3.7.1 Preparation for Removing the Front Alignment
Motor
0020-8359
1) Remove the stack wall (upper). (page 4-8) Reference[Removing the
Stack Wall (Upper)]
2) Remove the stack wall (lower). (page 4-8) Reference[Removing the
Stack Wall (Lower)]
3) Remove the process tray assembly. (page 4-26) Reference[Removing
the Process Tray Assembly]
4.3.7.2 Removing the Front Alignment Motor
0020-8360
1) Remove the cable [2] from the 3 wire saddles [1], and remove the connec-
tor [3].
F-4-56
2) Remove the cable [2] from the 2 wire saddles [1], and remove the connec-
tor [3].
[1]
[1]
[2]
[1]
[2]
[1] [2]
[3]
[3]
[2]
[1]