Canon S600, Service Manual

Page: 36 / 87

3.3 Disassembly and Reassembly
Supplemental information and cautions for disassembling and reassembling the printer
are stated below.
As for the disassembly procedure, refer to the Parts Catalog. The illustrations in the
Parts Catalog are numbered according to the order of disassembly.
3.3.1 Carriage lock release
Normally, when a cartridge is installed on the carriage and the power is turned off, the
printer moves the carriage to the capping position to lock it.
When the power is turned on, the carriage lock is normally released. However, if the
printer does not operate properly, you can release the carriage lock manually in one of
two ways:
a) On the back of the printer, push down the purge unit's locking pin.
b) On the front of the printer, rotate the gear as shown by the arrow in the illustration
below so that the locking pin goes down.
2-15
S600
Part 2: Troubleshooting
T
roub
leshooting
Purge Unit
a
b
Figure 2-4 Carriage Lock Release