Canon S100SP User Manual Download Page 149

Page: 149 / 182

An Error Message is Displayed on the Screen

149

Troubleshooting

■

Check the amount of free space on the hard disk.

You may need to increase the amount of free space by deleting any unnecessary files.

■

If the problem only occurs when printing a specific document, try editing the
document and then printing it.

If this resolves the problem, there may have been a problem in the original document. If
the same problem occurs with the edited document, contact the manufacturer of your
application.

■

There may be a problem in the printer driver. Uninstall the printer driver and
reinstall it.

Also refer to the procedure “Notes on Handling the USB Interface (for Windows Users)”
in the

Quick Start Guide.

➡

Uninstalling Printer Drivers

Summary of Contents for S100SP























































































































































































Search results

Summary of Contents for S100SP

Reviews:

Related manuals for S100SP

Brands by name

Popular brands

Canon S100SP, User Manual

Search results

Summary of Contents for S100SP

Reviews:

Related manuals for S100SP

Brands by name

Popular brands