16
6.4 Card slot attribute
The card slot attributes can be changed by operating the Memory Card Startup Utility on the host computer.
Card Slot Attribute
State
Read only
To protect the data on the memory card, writing to the memory card inserted in
the card slot is prohibited. (Default setting)
Read/Write
Writing data to the memory card inserted in the card slot is allowed. (Use of
memory cards where the write protection is set to the Read Only mode is
prohibited.)
Note:
When the memory card is inserted to the printer, this attribute cannot be changed.
As the card slot attributes are stored in nonvolatile memory on the printer, attributes are kept even if the
printer is powered off by disconnecting the AC plug.
6.5 Memory Card Direct Printing Function
6.5.1. Print
mode
“Print Selected” mode: To produce a blank frame
Once the applicable frame is set, set the next frame, and then change the applicable frame to “----“.
Ex. In a four-frame layout, to produce a blank frame in the second cell.
[Procedures on the operation panel in the Print Selected mode]
Order:
-01-
-02- -03- -02- -04-
Specified
photo
number: 0001 0002 0003 ---- 0004
6.5.2. Print Quality
The following quality levels can be selected. (O: Selectable)
Quality1
Quality2
Quality3
Ａ．
Photo Paper Pro 4”X6”
-
○
○
Ｂ．
Photo Paper Plus 4”X6”
-
○
○
Ｃ．
Photo Paper Pro Perforated 4”X6”
-
○
○
Ｄ．
Photo Paper Pro Letter
-
○
○
Ｅ．
Photo Paper Pro A4
-
○
○
Ｆ．
Plain Paper Letter
○
○
-
Ｇ．
Plain Paper A4
○
○
-
Default setting is Quality 2.
0001
0003
0004
