ENG-3
Handling Precautions
z
Do not leave the product in excessive heat such as
in a car in direct sunlight. High temperatures can
cause the product to malfunction.
z
If the lens is taken from a cold environment into a
warm one, condensation may develop on the lens
surface and internal parts. To prevent condensation
in this case, first put the lens into an airtight
plastic bag before taking it from a cold to warm
environment. Then take out the lens after it has
warmed gradually. Do the same when taking the
lens from a warm environment into a cold one.
z
In order to optimize aperture control, there are
occasions in which the aperture blades will move
during zooming and focusing, even when the
aperture value is set for aperture-priority AE or
manual exposure, etc.
z
Please also read any lens related handling
precautions listed in your camera’s instruction
manual.
General Precautions
Shooting Precautions
z
Focus again after recovering from the auto power
off status.
z
To maintain the focus position in the shooting-ready
status, set [Auto power off] to [Disable] on the
camera.
Summary of Contents for RF-S 18-150mm F3.5-6.3 IS STM
Page 1: ...ENG Instructions...
