ENG-15
A tripod or monopod attaches to the tripod mount on the lens.
Attaching the Tripod Mount
9. Tripod Mount
①
③
②
Collar
Lock
knob
1
Open the collar of the
tripod mount
z
Turn the lock knob
counterclockwise until it becomes
loose (about 3 turns) (
①
).
z
Pull the knob in the direction
of the arrow (
②
) to release the
collar (
③
).
④
Tripod
mounting
location
2
Attach tripod mount to
lens
z
With the collar open, insert
it into the tripod mounting
location on the lens and close
the collar (
④
).
⑦
⑤
⑥
3
Fix tripod mount to lens
z
While pulling the lock knob
(
⑤
), insert the end of the open
collar until it reaches its original
position (
⑥
).
z
Turn and tighten the lock knob,
fixing it securely to the lens (
⑦
).
When removing the tripod mount, hold the camera and lens and remove the mount following the
above procedure in reverse.
Switching the Orientation of the Image
By loosening the lock knob on the tripod mount you can rotate the camera and the lens to switch the
image in any orientation (vertical, horizontal, etc.). Make sure that the lock knob is tightened after
setting the camera in place.
Summary of Contents for RF 70-200mm
Page 1: ...ENG Instructions ...
