Canon REALiS WUX4000 D, User Manual

Page: 32 / 188

Part Names
32
Side Control
(1) LED indicators ( P33 )
The projector status is shown by the LED indicators (off / on / flashing).
For indicator status, refer to “LED Indicator Displays” (
P33 ).
(2) POWER button ( P45 , P66 )
Turns the projector on or off.
(3) MENU button ( P74 )
Displays a menu on the screen.
(4) LENS button
Each time the button is pressed, the
screen changes to focus adjustment
(
P59 ), zoom (image size) adjustment
( P58 ), or lens shift (image position)
adjustment ( P60 ). To adjust, use the
[ ] / [ ] or the [ ] / [ ] buttons.
(5) INPUT button ( P49 )
Switches the input signal.
(6) Pointer / VOL buttons ( P75 )
Adjust the sound volume.
[ ] button: Decreases the volume.
[ ] button: Increases the volume.
Selects the upper, lower, left or right
item in the menu.
(7) OK button ( P76 )
Determines the item selected from the
menu.
• POWER ON (green): Lights up or flashes when the power is on.
• STAND BY (red)
: Lights up or flashes during standby or when the projector is
shut down.
• WARNING (red) : Lights up or flashes when an error occurs.
• LAMP (orange) : Flashes when the time for replacing the lamp is near. Also lights
up together with the [WARNING] indicator (constantly lit) when
a lamp malfunction or lamp cover malfunction has occurred.
• TEMP (red) : Lights up together with the [WARNING] indicator (constantly lit)
when a temperature error has occurred. Flashes when the tem-
perature inside the projector is high.
(1)
(2)
(3)
(4)
(5) (7)
(6)