manualshive.com logo in svg

Canon REALIS LV-7590, User Manual

Share
Download
Canon REALIS LV-7590 User Manual Download Page 22

22

NOTES ON LENS INSTALLATION AND REPLACEMENT

●

  Do not touch or remove any parts except the lens and related parts. It may result in malfunctions, electrical shock, fire hazard 

or other accidents.

●

  Before installing or replacing the lens, check that the Model No. of the Projection Lens matches to the projector.

●

   For details of the lens and installation, contact the sales dealer where you purchased the projector.

●

  The mounting clamps that are shipped with the standard zoom lens LV-IL05 (not supplied with the projector) are designed for 

use with the standard zoom lens. Do not use the mounting clamps with any other lens.

 

After replacing the standard zoom lens 

with an optional lens (not supplied), save the mounting clamps in the event that you should reinstall the standard zoom lens.

●

   This projector is a precision machine. Do not subject the projector to strong shocks or vibrations when transporting the device. 

Failure to do so may cause malfunction or damage to the lens or projector.

Installation

Lens Lock Lever

Groove

Light-block sheet

Unplug the Lens Motor Lead connector from the socket on the Lens Attachment

 

(follow this procedure for 

replacing with the Powered lens)

, remove the 4 screws fixing the lens attachment to detach it 

(follow this 

procedure for replacing the lens)

, remove the safety lens caps on the optional or standard lens, attach the Lens 

Attachment (supplied with the projector) to the back end of the lens by using the removed screws or supplied 

screws, and then reconnect the Lens Motor Lead connector to the socket (

follow this procedure for replacing 

with the Powered lens)

. If you install the standard lens, you also need to attach the mounting clamps to the lens.

The mounting clamps that are shipped with the standard zoom lens LV-IL05 (not supplied with the projector) are 

designed for use with the standard zoom lens. Do not use the mounting clamps with any other lens.

Fit the lens to the projector. Make sure that the lens is fully inserted to the projector. 

While pressing the top cover release button on the top cover, slide the top cover back to the projector.

Slide the light-block sheet in the groove to mount if necessary. (Follow this procedure for replacing the lens.)

Push the Lens Lock Lever downward. Make sure that the lens is properly locked.

Light-Block Sheet for each Lens

Light-Block Sheet Type No. (Part No.)

Lens Part No.

Type PG1(610 339 2967)

LV-IL05

Type PH1(610 339 2974)

LV-IL03, LV-IL02, LV-IL04 

No need to attach

LV-IL01

6

7

8
9

10

Lens Motor Lead

Connector

Socket

Lens Attachment

Screw

Lens Attachment

Spacer

*Mounting clamp

*Mounting clamp

* Attach when mounting the standard lens.

Summary of Contents for REALIS LV-7590



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands