manualshive.com logo in svg

Canon PowerShot SX620 HS, User Manual, Page: 245 / 347

Share
Download
Canon PowerShot SX620 HS User Manual Download Page 245

245

ç

 Contents

Shooting Remotely

As you check a shooting screen on your smartphone, you can use 

it to shoot remotely.

1 

Secure the camera.

 

●

Once remote shooting begins, the 

camera lens will come out. Lens 

motion from zooming may also 

move the camera out of position. 

Keep the camera still by mounting 

it on a tripod or taking other 

measures.

2 

Connect the camera and 

smartphone (

=

 200).

 

●

In the privacy settings, choose 

[Yes].

3 

Choose remote shooting.

 

●

In Camera Connect on the 

smartphone, choose remote 

shooting.

 

●

The camera lens will come out. 

Keep your fingers away from the 

lens, and make sure no objects 

will obstruct it.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Reviews:

No comments