Canon PowerShot SX620 HS User Manual Download Page 200

Page: 200 / 347

200

Contents

Adding a Smartphone

These steps show how to use the camera as an access point, but

you can also use an existing access point (

205).

Install Camera Connect.

●

For an iPhone or iPad, find

Camera Connect in the App Store

and download and install the app.

●

For Android smartphones, find

Camera Connect in Google Play

and download and install the app.

Access the Wi-Fi menu.

●

Press the [ ] button.

●

If the [Device Nickname] screen is

displayed, choose [OK].

Choose [ ].

●

Press the [ ][ ][ ][ ] buttons

to choose [ ], and then press the

[ ] button.

Summary of Contents for PowerShot SX620 HS




























































































































































































































































































































































Search results

Summary of Contents for PowerShot SX620 HS

Reviews:

Canon PowerShot SX620 HS, User Manual, Page: 200 / 347

Search results

Summary of Contents for PowerShot SX620 HS

Reviews: