Canon Powershot SX520 HS, User Manual

Page: 63 / 315

63
ç
Contents
Still Images/Movies
●
If the camera is turned on while the [ ] button is held down, the
camera will no longer sound. To activate sounds again, press the
[
] button and choose [Mute] on the [ ] tab, and then
press the [ ][ ] buttons to choose [Off].
Still Images
●
A blinking [ ] icon warns that images are more likely to be
blurred by camera shake. In this case, mount the camera on a
tripod or take other measures to keep it still.
● If your shots are dark despite the flash firing, move closer to
the subject. For details on the flash range, see “Flash Range”
(
=
305).
●
The subject may be too close if the camera only beeps once
when you press the shutter button halfway. For details on the
focusing range (shooting range), see “Shooting Range” (
=
306).
●
To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
●
A blinking [ ] icon displayed when you attempt to shoot
indicates that shooting is not possible until the flash has finished
recharging. Shooting can resume as soon as the flash is ready,
so either press the shutter button all the way down and wait, or
release it and press it again.
●
Although you can shoot again before the shooting screen
is displayed, your previous shot may determine the focus,
brightness, and colors used.