264
ç
Contents
Checking Connection Information
Check the access point SSID used by the Eye-Fi card or the
connection status, as needed.
●
Press the [
] button,
choose [Eye-Fi Settings] on the
[
] tab, and then press the [
]
button.
●
Choose [Connection info], and
then press the [
] button.
●
The connection information
screen is displayed.
Disabling Eye-Fi Transfer
Configure the setting as follows to disable Eye-Fi transfer by the
card, if necessary.
●
Press the [
] button,
choose [Eye-Fi Settings] on the
[
] tab, and then press the [
]
button.
●
Choose [Eye-Fi trans.], and then
choose [Disable].
●
[Eye-Fi Settings] is not shown unless an Eye-Fi card is in the
camera with its write-protect tab in the unlocked position. For this
reason, you cannot change settings for an inserted Eye-Fi card if
the write-protect tab is in the locked position.
Summary of Contents for Powershot SX520 HS
